Interfacing MQ-MQ-2 Smoke / Gas Sensor Module Using Arduino To Measure Combustible Gas Concentration
Get to know the MQ2 / MQ-2 Sensor MQ2 is a sensor module that can be used to detect flammable fumes or gases at concentrations […]
Month: November 2019
Interfacing / Programming Light Sensor BH1750 using Arduino
Deskripsi In this article we will discuss the BH1750 light sensor along with examples of its program using Arduino. BH1750FVI is an IC sensor that […]
Interfacing GY-906 MLX90614 Non Contact IR (Infra Red) Temperature Sensor with Arduino
Description Regarding the GY-906 MLX90614 Module MLX90614 is an infrared thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal […]
Learn INA219 Current, Voltage & Power Sensor Modules with Arduino
Function Description INA219 is a cool sensor electronic module that not only allows us to measure current, but also voltage. With a little formula, we […]
Interfacing ACS712 Current Sensor With Arduino
About ACS712 ACS712 is a sensor module to measure current both AC current and DC current using Hall Effect technology. What is meant by the […]
I2C Scanner Program To Know I2C Addresses From Electronic Devices or Modules
What is I2C I2C is a serial protocol for a two-wire interface to connect low-speed electronic devices / modules such as microcontrollers, EEPROMs, A / […]
Interfacing LCD 2004 (20 × 4) or 1602 (16 × 2) Characters with I2C Backpack
Introduction This time let’s try interfacing the Arduino UNO microcontroller to display text / characters using LCD 2004 (20 × 4) or 1602 (16 × […]
IC MAX7219 – 8 Digit 7 Segment, Dot Matrix 8×8 LED Display Driver IC
MAX7219 is an IC designed to control 8×8 Dot Matrix LEDs, 7-segment LEDs up to 8 digits or 64-point individual LEDs. Pin Configuration MAX7219 is […]
Programming MAX7219 Dot Matrix 4 In 1 Display Module with Arduino
In the following article we will explain the Dot Matrix Display Module MAX7219 4 In 1 which is widely available on the market, along with […]
Example of the PZEM-004T V3 V3.0 Interfacing Program Using Arduino
About the PZEM-004T V3.0 In this article, we will discuss the use or use of the PZEM-004T V3.0 module that is interfaced or programmed using […]