NN Digital | Learn Arduino, ESP8266 / NodeMCU, STM32, Raspberry Pi, Microcontroller and Other Information Technology

Media for Mutual Learning and Sharing Knowledge That Is Useful to Others

  • Home
  • Arduino
  • ESP Based
  • STM Based
  • Raspberry Pi
  • Hobby & Others
  • Privacy Policy
  • About Us
  • Bahasa IndonesiaBahasa Indonesia

Articles by admin

Interfacing MQ-MQ-2 Smoke / Gas Sensor Module Using Arduino To Measure Combustible Gas Concentration

November 20, 2019 admin 0

Get to know the MQ2 / MQ-2 Sensor MQ2 is a sensor module that can be used to detect flammable fumes or gases at concentrations […]

Interfacing / Programming Light Sensor BH1750 using Arduino

November 10, 2019 admin 1

Deskripsi In this article we will discuss the BH1750 light sensor along with examples of its program using Arduino. BH1750FVI is an IC sensor that […]

Interfacing GY-906 MLX90614 Non Contact IR (Infra Red) Temperature Sensor with Arduino

November 9, 2019 admin 2

Description Regarding the GY-906 MLX90614 Module MLX90614 is an infrared thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal […]

Learn INA219 Current, Voltage & Power Sensor Modules with Arduino

November 5, 2019 admin 0

Function Description INA219 is a cool sensor electronic module that not only allows us to measure current, but also voltage. With a little formula, we […]

Interfacing ACS712 Current Sensor With Arduino

November 5, 2019 admin 0

About ACS712 ACS712 is a sensor module to measure current both AC current and DC current using Hall Effect technology. What is meant by the […]

I2C Scanner Program To Know I2C Addresses From Electronic Devices or Modules

November 5, 2019 admin 0

What is I2C I2C is a serial protocol for a two-wire interface to connect low-speed electronic devices / modules such as microcontrollers, EEPROMs, A / […]

Interfacing LCD 2004 (20 × 4) or 1602 (16 × 2) Characters with I2C Backpack

November 5, 2019 admin 0

Introduction This time let’s try interfacing the Arduino UNO microcontroller to display text / characters using LCD 2004 (20 × 4) or 1602 (16 × […]

IC MAX7219 – 8 Digit 7 Segment, Dot Matrix 8×8 LED Display Driver IC

November 4, 2019 admin 0

MAX7219 is an IC designed to control 8×8 Dot Matrix LEDs, 7-segment LEDs up to 8 digits or 64-point individual LEDs. Pin Configuration MAX7219 is […]

Programming MAX7219 Dot Matrix 4 In 1 Display Module with Arduino

November 4, 2019 admin 0

In the following article we will explain the Dot Matrix Display Module MAX7219 4 In 1 which is widely available on the market, along with […]

Example of the PZEM-004T V3 V3.0 Interfacing Program Using Arduino

November 4, 2019 admin 3

About the PZEM-004T V3.0 In this article, we will discuss the use or use of the PZEM-004T V3.0 module that is interfaced or programmed using […]

Posts navigation

1 2 »
  • Interfacing MQ-MQ-2 Smoke / Gas Sensor Module Using Arduino To Measure Combustible Gas Concentration
  • Interfacing / Programming Light Sensor BH1750 using Arduino
  • Interfacing GY-906 MLX90614 Non Contact IR (Infra Red) Temperature Sensor with Arduino
  • Learn INA219 Current, Voltage & Power Sensor Modules with Arduino
  • Interfacing ACS712 Current Sensor With Arduino
  • I2C Scanner Program To Know I2C Addresses From Electronic Devices or Modules
  • Interfacing LCD 2004 (20 × 4) or 1602 (16 × 2) Characters with I2C Backpack
  • IC MAX7219 – 8 Digit 7 Segment, Dot Matrix 8×8 LED Display Driver IC
  • Programming MAX7219 Dot Matrix 4 In 1 Display Module with Arduino
  • Example of the PZEM-004T V3 V3.0 Interfacing Program Using Arduino
7 Segment Arduino Arduino IDE Arduino UNO Contactless Current Display ESP8266 Example GY-906 GY-906 MLX90614 HC-SR04 I2C Backpack INA219 Interfacing MQ2 Power Program Programming PZEM-004T PZEM-004T V2 PZEM-004T V3 PZEM-004T V3.0 Sensor Tutorial
  • admin: You're welcome
  • TANGO electronic: Cannot running on Windows 10 64bit. Even when i set its compatibility with any Windows options. Also even when i…
  • Ronald: Hello, it works great. thanks for the hard work. greetings Ronald

Categories

  • Arduino (14)
  • ESP Based (2)
  • Hobby & Others (1)
  • Raspberry Pi (1)
  • STM Based (1)

Archives

  • November 2019
  • August 2019

Copyright © 2021 | NN-Digital